Just Add Power
HDMI over standard IP networks
HomeJustAddPower OverviewProductseShopContact UsDownloads


JustAddPower Overview
The strong points of an IP signal transmission system arise during the IP transmission of contents that are rich in details such as e.g. Excel charts. Most systems have difficulties here and can’t provide for an acceptable image quality  on a distant screen.

The enhanced JustAddPower 2G solution can handle it.
In a live presentation you see that no difference can be seen between the original image directly at the source and the transmitted image at the end of the IP transmission line.

By the way:
the established JustAddPower solution is still a very good choice for the transmission of moving images.

 


 
JustAddPower 2G Features
  • Point-to-Point or Point-to-Multipoint
  • Routing of sources up to 65.000 displays
  • Suitable for all digital signals
  • DVI, HDMI and DisplayPort up to 1080p
  • Top image quality also for PC signals
  • Smooth transmission of any content, even complex Excel charts
  • No artefacts with moving images
  • Higher bandwidth, lower compression, no artefacts
  • Extremely quick switching times
  • In spite of HDCP negotiation quick switching between sources
  • Transmitter and Receiver immediately available
  • with Auto-IP Transmitter and receiver are immediately available in the network and serviceable over Auto-IP without configuration
  • Control of player and display over RS-232 Bi-directional
  • RS-232 interfaces allow for a status request and the control of players and display from a central point


 

JustAddPower: HDMI Signal distribution over standard IP Networks!    
 

The transmission and distribution of top-quality HDMI signals
is fraught with challenges and difficulties:
limited distances, sub-optimal resolutions and major headaches with
HDCP (High-bandwidth Digital Content Protection) and
EDID (Extended Display Identification Data)
are just some of the main issues
causing trouble in HDMI signal management.

 
We are very proud to announce a new product which solves many of these problems:
ProNET is a system which allows for point-to-point, point-to-multipoint and multipoint-to-multipoint
configurations for transmitting and managing HDMI signals over standard IP networks!

The ProNET allows you to simultaneously send out an HDMI 1.3 Signal (up to 1080p) to one or more HDMI video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure.

Can be used to distribute HD digital content from multiple sources to up to 200 remote displays on a LAN by cascading Ethernet switches up to 3 levels, allowing the farthest display to be located up to 300 m away from the 1080p source device while sustaining excellent picture & sound quality.

Each device is installed using 1 piece of UTP or STP cable.
AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss.
The integrated Scaler function allows different input and output resolutions up to 2048x2048
(different output displays can be at different resolutions).

 

Why JustAddPower?    
  • Transmits full HD resolution signals to 1920 x 1080
  • Point-to-Point, Point-to-Multipoint, and Multipoint-to-Multipoint configurations possible
  • No distance limitations
  • Up to 20 transmitters and 200 receivers possible in a single system
  • Utilizes standard network switches for matrix switching functionality
  • Each receiver automatically outputs the optimal resolution of the display
  • it is connected to, regardless of the resolution it receives
  • Completely HDCP and EDID compatible
  • Transmitter is also available as a 19“ rack mount unit (with 3 transmitter units built-in)
  • Significantly less expensive than standard HDMI transmission technology
  • Not an HDMI Balun, but an HDMI over IP system.

This means you can create your own A/V Ethernet network
and all of the recievers will find the transmitter automatically
It may even be used over smaller existing house networks
and low cost LAN switches and routers.

Functions:

HDMI 1.3 signals over FastEthernet
HDMI conform (EDID, HDCP)
Each transmitter delivers bist format (EDID)
Each receiver has a built in scaler
Each display gets native format (EDID)
IR control of the source is possible

Applications:


Digital Signage
Content Distribution
Residential Multiroom AV
replaces Distribution Amplifiers
replaces Baluns
replaces Matrix Switchers

Advantages:

Use of existing IT infrastructure
Reliable professional quality
Nice price
Flexible and scalable


Point-to-Point connection



Point-to-Multipoint connection



Multipoint-to-Multipoint connection





The enhanced ProNET Advanced solution can handle it.
In a live presentation you see that no difference can be seen between the original image directly at the source and the transmitted image at the end of the IP transmission line.

 

 


 
 
 
HomeJustAddPower OverviewProductseShopContact UsDownloads